DIY Mini Adirondack Chair [6:1 Fashion Doll Scale]

There is something uniquely summer about an Adirondack chair. Here’s my take on a miniature one with reclining features.

Note the article below contains affiliate links. It helps me out if you use them, no worries in any case.

Supplies:

Standard Craft Sticks, 4.5″ long x 3/8″ wide: For the chair seat, legs, arm supports, and “notches” on the reclining mechanism.

Large Craft Sticks, 6″ long x 5/8″ wide: 2 count for the supporting beams along the sides of the chair. 5 count for the back of the chair.

Mini Craft Sticks, 2.5″ long x 3/8 wide, 2 count: For the reclining mechanism behind the chair back.

Medium Craft Sticks, 4.5″ long x 9/16″ wide, 2 count: For the armrests.

Dowel Rod, 3/16″ diameter, 4″ long, 1 count: For the reclining mechanism behind the chair back.

Craft Wire: To hold together the hinge on the reclining mechanism, and to hold the base of the chair back in place as it reclines.

Hot Glue Gun: To hold all the craft sticks together.

Wood Stain/Paint: Almost any kind of stain or paint can be used here. I’ve used wood stain, indoor house paint, acrylic craft paint, and finger paint with good results.

Ruler/Cutting Board: This board has been a helpful tool for me to measure and line up my work. In this particular craft, the hemisphere in the center was an excellent guide for cutting the back of the chair.

Foam Brush: A great tool to have on hand. Offers a nice, smooth finish in my experience.

Drop Cloth/Rag: To catch any drips or spills while painting. Makes for easier cleanup at the end.

Gloves: Protects skin from paint stains/debris. Makes for easier cleanup.

Wire Cutters: To cut craft wire cleanly. I prefer these miniature versions for crafts.

Scissors: To cut craft sticks. Sometimes not just any pair of scissors will do. I’ve found a need a pair that is a little more heavy duty than average to cut through most craft sticks.

Drill, with 1/16″ and 3/16″ bits: To drill holes for reclining mechanism. I found I needed to apply very light pressure to keep the craft sticks from splitting.